3D Printers/CR10 2

From Hacklab.TO Public Wiki
Revision as of 04:08, 6 December 2023 by Chalmers (talk | contribs)
Jump to navigation Jump to search

Status

  • Works!
  • octoprint01.in.hacklab.to



Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes



Maintenance Log

Most recent entries at the top.

Date Notes Entry By
December 04 2023
  • Added an octoprint server to this CR10. It's sd-card reader is busted, so this seemed the easiest way to get it up and running again.
  • Bought glue sticks and applied glue to it's build plate
  • Performed some bed levelling.
Chalmers