3D Printers/Ender 3 1: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
Tags: Mobile edit Mobile web edit |
||
| Line 27: | Line 27: | ||
=== 2024-02-25 === | === 2024-02-25 === | ||
Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off. | Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off. | ||
=== 2024-02-25 === | |||
Chalms fixed the BL touch by turning off the printer, *grabbing the probe tip*, and forcing it up and down a few times. | |||
Latest revision as of 16:20, 28 March 2024
Status
- Works!
- Upload G-Code to Micro-SD Card
- Octoprint at octopi03.in.hacklab.to
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes |
|---|---|---|---|---|
Maintenance Log
2024-02-25
Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off.
2024-02-25
Chalms fixed the BL touch by turning off the printer, *grabbing the probe tip*, and forcing it up and down a few times.