3D Printers/Ender 3 1: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
Tags: Mobile edit Mobile web edit
 
(3 intermediate revisions by 3 users not shown)
Line 3: Line 3:
* '''Works!'''
* '''Works!'''
* '''Upload G-Code to Micro-SD Card'''
* '''Upload G-Code to Micro-SD Card'''
* Octoprint at '''[http://octopi03.in.hacklab.to octopi03.in.hacklab.to]'''
</onlyinclude>
</onlyinclude>


Line 21: Line 22:
|-
|-
|}
|}
== Maintenance Log ==
=== 2024-02-25 ===
Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off.
=== 2024-02-25 ===
Chalms fixed the BL touch by turning off the printer, *grabbing the probe tip*, and forcing it up and down a few times.

Latest revision as of 16:20, 28 March 2024

Status



Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes

Maintenance Log

2024-02-25

Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off.

2024-02-25

Chalms fixed the BL touch by turning off the printer, *grabbing the probe tip*, and forcing it up and down a few times.