3D Printers/Ender 3 1: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
* '''Works!''' | * '''Works!''' | ||
* '''Upload G-Code to Micro-SD Card''' | * '''Upload G-Code to Micro-SD Card''' | ||
* Octoprint at octopi03.in.hacklab.to | * Octoprint at '''[http://octopi03.in.hacklab.to octopi03.in.hacklab.to]''' | ||
</onlyinclude> | </onlyinclude> | ||
Revision as of 23:38, 26 February 2024
Status
- Works!
- Upload G-Code to Micro-SD Card
- Octoprint at octopi03.in.hacklab.to
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes |
|---|---|---|---|---|
Maintenance Log
2024-02-25
Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off.