111
edits
3D Printers/Ender 5 plus: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
|||
| Line 45: | Line 45: | ||
* always check the first layer!!! there is live z-adjust on the touchscreen called "baby steps" | * always check the first layer!!! there is live z-adjust on the touchscreen called "baby steps" | ||
== Tips for printing with a big nozzle == | |||
*The whole point of the big nozzle is to have thicker extrusion lines and bigger layer heights, so less extrusion lines in total are drawn by the printer | |||
*a 0.4mm nozzle will take five extrusion lines to draw 2mm of perimeter, whereas the 1mm nozzle can do it in two lines. 2mm perimeters are pretty freaking strong, you can get away with like infill at 10% or 15% (some people do 5% lol) because most of the strength comes from the perimeters. Just set the top and solid infill to 5 or more layers to make sure it covers up any drooping of the top layers | |||
*So a 1 mm nozzle has a max layer height of 0.75mm, which is what the config bundle uploaded here is set too. The extrusion width is set to 1mm for perimeters and 1.2mm for infill | |||
*If your part needs to be an exact height, you can try to set the first layer to a value that give the desired final total height (first layer height + 0.75mm*layers = desired height) | |||
*Can also try out prusa slicers cool feature of variable layer height, but never done it who knows what will happen. This should divide the object into vertical sections, which higher detail sections printing at a low layer height, and low detail sections print with a higher layer height | |||
== Hardware == | == Hardware == | ||