3D Printers/Ender 5 plus

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
FlashForge Creator Pro

Status


Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes
June 28, 2020 asdfsadfsdaf asfsadfsadf

Hardware


Software

To use pronterface to control the printer, first power up the printer, then connect the usb cable to your computer. On win10 it should auto-detect and possibly install 'maple' (wtf that is lol). Baud 115200


Calibration notes

  • using the built in e-steps I got 137.85 steps/mm

Printable Upgrades

https://www.thingiverse.com/thing:4742487 https://www.thingiverse.com/thing:4742501

Voron cooling fans: https://www.thingiverse.com/thing:5171295

Z-axis sync indicators: https://www.thingiverse.com/thing:4460521

Glass Print Plate Usage

Usage

SD Card

Slicer Settings

A few random printing tips

know what you're doing!!! this printer is for seasoned vets only!!

Octoprint at octopi4.hacklab.to

I wish...

Maintenance Resources

put stuff here lol

Maintenance Log

Most recent entries at the top.

Date Notes Entry By
June 9, 2022 Setting up the printer Rana