111
edits
3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 04:54, 13 April 2017
, 13 April 2017→Status
(Added print temperature for PLA and ABS) |
(→Status) |
||
| Line 3: | Line 3: | ||
== Status == | == Status == | ||
<onlyinclude> | <onlyinclude> | ||
*The octopi4.hacklab.to link is not working, even after power cycling the raspberry pi. You can print from the printer directly by putting your print file on an SD card, there is one already in the printer. It only accepts x3g files, so you will have to convert your .gcode file (made in slic3r) to x3g using this utility http://markwal.github.io/GpxUi/ | |||
* Operational | * Operational | ||
* The 2nd print head not working until parts are purchased & replaced. | * The 2nd print head not working until parts are purchased & replaced. | ||