3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 18:12, 28 January 2020
, 28 January 2020→Usage
(→Usage) |
|||
| (9 intermediate revisions by 3 users not shown) | |||
| Line 5: | Line 5: | ||
* '''Working''' | * '''Working''' | ||
* [[FlashForge_Creator_Pro#Usage|Slic3r Settings here]] | * [[FlashForge_Creator_Pro#Usage|Slic3r Settings here]] | ||
* '''http://octopi4.hacklab.to/''' | * '''http://octopi4.in.hacklab.to/''' | ||
* [[FlashForge_Creator_Pro#SD Card|Or print without OctoPrint using the SD Card]] | * [[FlashForge_Creator_Pro#SD Card|Or print without OctoPrint using the SD Card]] | ||
</onlyinclude> | </onlyinclude> | ||
| Line 18: | Line 18: | ||
!Notes | !Notes | ||
|- | |- | ||
| Jan 2020 | |||
| Blue PETG | |||
| Default Slic3r bundle settings | |||
| Default Slic3r bundle settings | |||
| == Last known good workflow (for Chalmers) == | |||
0. Glue stick the build plate | |||
1. Install slicer config | |||
2. Install slicer config bundle | |||
3. set slicer to simple mode | |||
4. increase print scale by 4.1353% (because something screws the scale up in this workflow) | |||
5. slice model | |||
6. load sliced model into GpxUi | |||
7. translate to Replicator 2 RepRap | |||
|- | |||
| Nov, 2018 | | Nov, 2018 | ||
| Hatchbox forest green ABS | | Hatchbox forest green ABS | ||
| Line 72: | Line 93: | ||
However, it is possible, to use the printer with open source toolchain based on Slic3r. [https://github.com/prusa3d/Slic3r/releases Slic3r Prusa Edition] is highly recommended. | However, it is possible, to use the printer with open source toolchain based on Slic3r. [https://github.com/prusa3d/Slic3r/releases Slic3r Prusa Edition] is highly recommended. | ||
Use Instructions in the log from Jan 2020 at the top of this wiki. | |||
It is still possible to use makerbot software, just generate an .x3g file instead of .gcode and upload it to octoprint. | It is still possible to use makerbot software, just generate an .x3g file instead of .gcode and upload it to octoprint. | ||
| Line 153: | Line 173: | ||
*** GCC 4.9 needs to be installed. See https://askubuntu.com/questions/466651/how-do-i-use-the-latest-gcc-on-ubuntu <br /> | *** GCC 4.9 needs to be installed. See https://askubuntu.com/questions/466651/how-do-i-use-the-latest-gcc-on-ubuntu <br /> | ||
*** Then the .AppImage file can just be downloaded, marked as executable, and run. | *** Then the .AppImage file can just be downloaded, marked as executable, and run. | ||
* Load config -- | * Load config and config bundle into Slic3r from this archive -- https://knowledge.hacklab.to/w/images/e/e9/Flashforge_slic3r_configs.zip | ||
***a copy of these two .ini files can be found on the SD card in the printer | ***a copy of these two .ini files can be found on the SD card in the printer | ||
* Select File -> Quck Slice and Save As.. or click on 'Send To Printer' | * Select File -> Quck Slice and Save As.. or click on 'Send To Printer' | ||
| Line 160: | Line 179: | ||
Alternatively, overwrite whole Slic3r config. If you have other printer settings, they will be destroyed! | Alternatively, overwrite whole Slic3r config. If you have other printer settings, they will be destroyed! | ||
* Download | * Download https://knowledge.hacklab.to/w/images/e/e9/Flashforge_slic3r_configs.zip | ||
* Extract as '''~/.Slic3r''' directory for Linux | * Extract as '''~/.Slic3r''' directory for Linux | ||
* Extract as '''~/Library/Application Support/Slic3r/''' directory for Mac | * Extract as '''~/Library/Application Support/Slic3r/''' directory for Mac | ||
| Line 210: | Line 229: | ||
| June 12, 2019 | | June 12, 2019 | ||
| Y-axis appeared to be skipping steps, but we found that there was a set screw loose on the timing pulley on one of the sides, so the whole gantry was driven by the belt on one side only. We tightened the set screw and squared the axis. Also, we flipped the timing belt pulley (hub toward the motor) on the Y axis motor so that the belt doesn't touch the motor flange. It's harder to access but it's tightened well and hopefully you won't have to tighten it again. We also retightened all the other belts for good measure. It works well now. | | Y-axis appeared to be skipping steps, but we found that there was a set screw loose on the timing pulley on one of the sides, so the whole gantry was driven by the belt on one side only. We tightened the set screw and squared the axis. Also, we flipped the timing belt pulley (hub toward the motor) on the Y axis motor so that the belt doesn't touch the motor flange. It's harder to access but it's tightened well and hopefully you won't have to tighten it again. We also retightened all the other belts for good measure. It works well now. | ||
| Misha | |||
|- | |||
| May 2019 | |||
| The feeding tube for the filament is too wide (4 mm ID 6 mm OD) and too stiff as a result. The problem is, it pushes on the print head in one direction so when the axis is loose, it is printing skewed towers of pisa, in the direction in which the tube pushes. We fed the wire without the tube so that there is no extra pressure on the axis. Therefore the printing errors average to zero. | |||
We bought a smaller and less springy tube (also PTFE) but we are waiting for someone more knowledgeable to install it. | |||
| Misha | | Misha | ||
|- | |- | ||