3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
Line 79: | Line 79: | ||
*DO NOT put acetone on surface or high % isopropyl, this is will damage the surface. | *DO NOT put acetone on surface or high % isopropyl, this is will damage the surface. | ||
----- | ----- | ||
Print not sticking? Raise the bed up a little to squish that first layer more. | Print not sticking? Raise the bed up a little to squish that first layer more. Or use a heated bed for the first layer. Like 50-60 C for PLA? | ||
----- | ----- | ||