3D Printers/FlashForge Creator Pro: Difference between revisions

Jump to navigation Jump to search
No edit summary
Line 82: Line 82:


== SD Card ==
== SD Card ==
You can print from the printer directly by putting your print file on an SD card, there is one already in the printer. It only accepts x3g files, so you will have to convert your .gcode file (made in slic3r) to x3g using this utility http://markwal.github.io/GpxUi/
You can print from the printer directly by putting your print file on an SD card, there is one already in the printer. It only accepts x3g files, so you will have to convert your .gcode file to x3g using this utility called GpxUi http://markwal.github.io/GpxUi/
 


A copy of GpxUi can be found on the SD card in the printer.
A copy of GpxUi can be found on the SD card in the printer.