Battery Charger: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
(New page: Hacklab has a multi-chemistry battery charger on loan from Dan Fraser. It is a Thunder Power TP-610C charger. There are several parts to the system: * Charger * Balance board * Banana p...)
 
No edit summary
Line 29: Line 29:


The charger works well with the large, heavy 12V regulated power supply that lives on the window sill.
The charger works well with the large, heavy 12V regulated power supply that lives on the window sill.
Here are some safety tips for using this charger:
* Double-check all settings before starting a charge
* Never leave charging batteries unattended
* When charging lithium batteries make sure you have selected the proper charge rate and voltage, and monitor the battery for any heat or "puffing" during the charge.  Be prepared to stop the charge if anything seems to be going wrong!


[[category: Documentation]][[Category:Equipment]]
[[category: Documentation]][[Category:Equipment]]

Revision as of 22:45, 11 July 2010

Hacklab has a multi-chemistry battery charger on loan from Dan Fraser.

It is a Thunder Power TP-610C charger. There are several parts to the system:

  • Charger
  • Balance board
  • Banana plug to alligator clip charge cable

Feel free to make your own custom banana plug charge leads for whatever type of battery you need to charge.

This charger is capable of charging almost every type of battery, including:

  • Lithium Ion (LiIon)
  • Lithium Polymer (LiPo)
  • Lithium Iron Phosphate (A120)
  • Nickel Cadmium (NiCd)
  • Nickel Metal Hydride (NiMH)
  • Lead Acid (Pb)

As with any flexible tool, you have to learn to use it properly. The manual is here:

PLEASE READ THE MANUAL BEFORE USE

http://thunderpowerrc.com/PDF/610C0-User-Manual.pdf

There is also a good introduction to this charger and multi-format chargers in general, with much better english:

http://www.helifreak.com/showthread.php?t=68927

The charger works well with the large, heavy 12V regulated power supply that lives on the window sill.

Here are some safety tips for using this charger:

  • Double-check all settings before starting a charge
  • Never leave charging batteries unattended
  • When charging lithium batteries make sure you have selected the proper charge rate and voltage, and monitor the battery for any heat or "puffing" during the charge. Be prepared to stop the charge if anything seems to be going wrong!