Darkroom/Timer: Difference between revisions
Jump to navigation
Jump to search
(Initial notes.) |
No edit summary |
||
| Line 14: | Line 14: | ||
* Set the Active/Standby switch on the timer control panel to Active | * Set the Active/Standby switch on the timer control panel to Active | ||
* Scan the barcode for the process you want under the crosshairs that appear on the wall | * Scan the barcode for the process you want under the crosshairs that appear on the wall | ||
** Barcodes | ** Barcodes can be found on instruction sheets for each process that are hung up behind the door. | ||
* Double check that the timer is displaying the process you want to run, and press the big green SELECT button | * Double check that the timer is displaying the process you want to run, and press the big green SELECT button | ||
* The timer may ask if you want to adjust the time for specific steps. | * The timer may ask if you want to adjust the time for specific steps. | ||
| Line 24: | Line 24: | ||
* To abort a step in progress, hold the SELECT button until you hear a buzzer. | * To abort a step in progress, hold the SELECT button until you hear a buzzer. | ||
== Other Information == | |||
To generate new barcodes, you can use the [http://htmlpreview.github.io/?https://github.com/hacklabto/darkroomtimer/blob/master/generator/timergen.html Darkroom Timer Barcode Generator] | To generate new barcodes, you can use the [http://htmlpreview.github.io/?https://github.com/hacklabto/darkroomtimer/blob/master/generator/timergen.html Darkroom Timer Barcode Generator] | ||