File:Prusa intro load filament physical.png

From Hacklab.TO Public Wiki
Revision as of 05:05, 3 March 2024 by Harry.braviner (talk | contribs) (Photos of a filament end trimmed to a 45 degree angle, and showing the filament inserted into the printer's filament guide.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Prusa_intro_load_filament_physical.png(400 × 266 pixels, file size: 169 KB, MIME type: image/png)

Summary

Photos of a filament end trimmed to a 45 degree angle, and showing the filament inserted into the printer's filament guide.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current05:05, 3 March 2024Thumbnail for version as of 05:05, 3 March 2024400 × 266 (169 KB)Harry.braviner (talk | contribs)Photos of a filament end trimmed to a 45 degree angle, and showing the filament inserted into the printer's filament guide.

The following page uses this file:

Metadata