HackCNC: Difference between revisions
Jump to navigation
Jump to search
→General Workflow
(Add links to fusion settings files) |
|||
(One intermediate revision by one other user not shown) | |||
Line 44: | Line 44: | ||
Idea! -->3D model -->Does it (and the clamps needed to make sure it stays still while machining) fit in the machining box (xyz)? -->Availability/cost of raw material and cutting tools -->CAM/G-code generation -->Double-check that your depth of cut, feeds, and speeds are appropriate -->Cutting simulation to make sure the machine does not crash the cutter into something it should not cut -->Cut raw material to size (on bandsaw or other device) and where applicable ”square” corners -->Attach cutter and clamp squared raw material -->Put on your safety glasses, double check you don’t have any loose hair, clothes, jewelry that can get caught in the machine -->Turn on HackCNC power and load program in linuxcnc -->Make sure you and the HackCNC agree where 0 is for the xyz axis! -->Run the first pass in the air above the z axis with your hand on the e-stop and verify spindle coolant flow -->Cut your parts! -->Lather/rinse/repeat as necessary with other cutters until we acquire an automatic tool changer | Idea! -->3D model -->Does it (and the clamps needed to make sure it stays still while machining) fit in the machining box (xyz)? -->Availability/cost of raw material and cutting tools -->CAM/G-code generation -->Double-check that your depth of cut, feeds, and speeds are appropriate -->Cutting simulation to make sure the machine does not crash the cutter into something it should not cut -->Cut raw material to size (on bandsaw or other device) and where applicable ”square” corners -->Attach cutter and clamp squared raw material -->Put on your safety glasses, double check you don’t have any loose hair, clothes, jewelry that can get caught in the machine -->Turn on HackCNC power and load program in linuxcnc -->Make sure you and the HackCNC agree where 0 is for the xyz axis! -->Run the first pass in the air above the z axis with your hand on the e-stop and verify spindle coolant flow -->Cut your parts! -->Lather/rinse/repeat as necessary with other cutters until we acquire an automatic tool changer | ||
== PCB Workflow == | |||
Check [https://docs.google.com/document/d/1JE3ZdaMEde4q_g6oxhJ-d6-frnd0xzpPRKbd6fkVK28/edit?usp=sharing link to google doc] | |||
== Fusion 360 settings == | == Fusion 360 settings == | ||
These files configure Fusion CAM for the machine. You might have to go into preferences and enable | These files configure Fusion CAM for the machine. You might have to go into preferences and enable Cloud Libraries in General -> Manufacture and Machine Configuration under Preview Features. | ||
To use the files, upload them into the Asset project on the data panel. | To use the files, upload them into the Asset project on the data panel. |