Laser Manual: Difference between revisions
Jump to navigation
Jump to search
→Gantry moves as desired, but no beam is output
Line 201: | Line 201: | ||
* Check to ensure the beam override switch is not on. | * Check to ensure the beam override switch is not on. | ||
* Check to ensure that a non-zero power level has been selected. | * Check to ensure that a non-zero power level has been selected. | ||
* Switch Axis to show "Machine Coordinate View" and make sure the Z axis is touched off at the | * Switch Axis to show "Machine Coordinate View" and make sure the Z axis is touched off at the machine's zero point. if Z is touched off high or low, the laser control could be erratic. | ||
* Check to make sure the red light outside the laser room is on and spinning. If it is not, speak to someone who has previous laser experience. | * Check to make sure the red light outside the laser room is on and spinning. If it is not, speak to someone who has previous laser experience. | ||