Laser Manual: Difference between revisions

Laser Manual (view source)

320 bytes removed , 30 June 2015

3

edits

@@ Line 233: / Line 233: @@
 === SVG Conversion Workflow ===
-* Avatar-X developed an SVG to Gcode converter. It runs in Windows and is available from svn here: [https://avbrand.com:8443/svn/hacklab/Avatar-X/SVN%20to%20GCODE/releases/ avbrand svn] with a username and password of guest/guest.  Avatar-X is no longer a Hacklab member so I'm not sure how long this will be around or supported.  This tool does not work properly with Inkscape SVGs generated using the 'trace image' feature to trace a raster image.  All of the paths are all jumbled up upon importing to the SVGtoGCODE tool.
+* Avatar-X developed an SVG to Gcode converter. It runs in Windows and is available here:
+https://www.dropbox.com/sh/t685bxvxtckuq76/AADP_t7E56Pq2OrKq-9cls0-a?dl=0
+Just grab the latest numerical version.
 * the SVG converter works well with files from [http://www.inkscape.org/ Inkscape] which is free on many platforms and I think also installed on pubtoob.