Laser Manual: Difference between revisions
Jump to navigation
Jump to search
m
→Materials
m (→Materials) |
|||
| Line 218: | Line 218: | ||
| Polycarbonate || Lexan, Makrolon || Smoke and flame on thicker sheet || Not good for lasering, at least in thicker sheets. Bad for lasering, creates highly toxic fumes and messy ash. || ? | | Polycarbonate || Lexan, Makrolon || Smoke and flame on thicker sheet || Not good for lasering, at least in thicker sheets. Bad for lasering, creates highly toxic fumes and messy ash. || ? | ||
|- | |- | ||
| Anodized Alumnium || || Surface etching || Anodized aluminum can be marked (but not cut) || Full power | | Anodized Alumnium || || Surface etching || Anodized aluminum can be marked (but not cut) || N/A || Full power | ||
|- | |- | ||
| Bare Steel || || No effect || Our laser can't touch it || n/a | | Bare Steel || || No effect || Our laser can't touch it || n/a | ||