P-touch Label Maker Manual: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== PT-P710BT P-touch CUBE Plus == * [https://www.brother.ca/en/p/PTP710BT Manufactures Page] Software is setup on shared computer HL0002 == Second manual p-touch == F...") |
|||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 5: | Line 5: | ||
Software is setup on shared computer [[HL0002]] | Software is setup on shared computer [[HL0002]] | ||
== Creating QR codes == | |||
* Use the Main shared computer | |||
* Connect the Label maker via USB, load the label maker with 18mm tape. | |||
* Open the PTouch software (search PTouch using Windows start menu) | |||
* In the saved labels open `Hacklab-QRcode-Tag.lbx` | |||
* Determine the next number in the sequence - i.e. HL0079 -> HL0080 | |||
* Create the page at [https://knowledge.hacklab.to/wiki/HL00XX] | |||
** You can either immediately create a redirect (see [https://knowledge.hacklab.to/wiki/HL0001&redirect=no]) | |||
* Change the URL embedded in the QR Code | |||
* Change the text of the label | |||
* SAVE THE LABEL | |||
** This is how we determine the next number otherwise you have to search HL00* in the wiki. | |||
* Print it out on HL0001 using White 18mm tape. | |||
== Second manual p-touch == | == Second manual p-touch == | ||
FIXME | FIXME | ||
Latest revision as of 21:42, 13 April 2024
PT-P710BT P-touch CUBE Plus
Software is setup on shared computer HL0002
Creating QR codes
- Use the Main shared computer
- Connect the Label maker via USB, load the label maker with 18mm tape.
- Open the PTouch software (search PTouch using Windows start menu)
- In the saved labels open `Hacklab-QRcode-Tag.lbx`
- Determine the next number in the sequence - i.e. HL0079 -> HL0080
- Create the page at [1]
- You can either immediately create a redirect (see [2])
- Change the URL embedded in the QR Code
- Change the text of the label
- SAVE THE LABEL
- This is how we determine the next number otherwise you have to search HL00* in the wiki.
- Print it out on HL0001 using White 18mm tape.
Second manual p-touch
FIXME