P-touch Label Maker Manual: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
(Basic QR code logic.)
(→‎Creating QR codes: Name the software)
Line 8: Line 8:
== Creating QR codes ==  
== Creating QR codes ==  


There's a file on the shared computer - in the saved labels - `Hacklab-QRcode-Tag.lbx`
* Use the Main shared computer  
 
* Open the PTouch software (search PTouch using Windows start menu)
* In the saved labels open Hacklab-QRcode-Tag.lbx`
* Determine the next number in the sequence - i.e. HL0079 -> HL0080
* Determine the next number in the sequence - i.e. HL0079 -> HL0080
* Create the page at [https://knowledge.hacklab.to/wiki/HL00XX]
* Create the page at [https://knowledge.hacklab.to/wiki/HL00XX]
Line 17: Line 18:
* SAVE THE LABEL
* SAVE THE LABEL
** This is how we determine the next number otherwise you have to search HL00* in the wiki.  
** This is how we determine the next number otherwise you have to search HL00* in the wiki.  
* Print it out.  
* Print it out.
 


== Second manual p-touch ==
== Second manual p-touch ==


FIXME
FIXME

Revision as of 10:10, 14 January 2024

PT-P710BT P-touch CUBE Plus

Software is setup on shared computer HL0002


Creating QR codes

  • Use the Main shared computer
  • Open the PTouch software (search PTouch using Windows start menu)
  • In the saved labels open Hacklab-QRcode-Tag.lbx`
  • Determine the next number in the sequence - i.e. HL0079 -> HL0080
  • Create the page at [1]
    • You can either immediately create a redirect (see [2])
  • Change the URL embedded in the QR Code
  • Change the text of the label
  • SAVE THE LABEL
    • This is how we determine the next number otherwise you have to search HL00* in the wiki.
  • Print it out.

Second manual p-touch

FIXME