P-touch Label Maker Manual: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
(Missing Tick)
Line 8: Line 8:
== Creating QR codes ==  
== Creating QR codes ==  


* Use the Main shared computer  
* Use the Main shared computer
* Connect the Label maker via USB, load the label maker with 18mm tape.
* Open the PTouch software (search PTouch using Windows start menu)
* Open the PTouch software (search PTouch using Windows start menu)
* In the saved labels open `Hacklab-QRcode-Tag.lbx`
* In the saved labels open `Hacklab-QRcode-Tag.lbx`

Revision as of 22:13, 25 February 2024

PT-P710BT P-touch CUBE Plus

Software is setup on shared computer HL0002


Creating QR codes

  • Use the Main shared computer
  • Connect the Label maker via USB, load the label maker with 18mm tape.
  • Open the PTouch software (search PTouch using Windows start menu)
  • In the saved labels open `Hacklab-QRcode-Tag.lbx`
  • Determine the next number in the sequence - i.e. HL0079 -> HL0080
  • Create the page at [1]
    • You can either immediately create a redirect (see [2])
  • Change the URL embedded in the QR Code
  • Change the text of the label
  • SAVE THE LABEL
    • This is how we determine the next number otherwise you have to search HL00* in the wiki.
  • Print it out.

Second manual p-touch

FIXME