Ultimaker: Difference between revisions
Jump to navigation
Jump to search
Retired Printer
(Retired Printer) |
|||
(5 intermediate revisions by 2 users not shown) | |||
Line 12: | Line 12: | ||
!Status | !Status | ||
| | | Broken - Retired | ||
| | | Broken - Retired | ||
|- | |- | ||
!Material | !Material | ||
| | |ABS only | ||
|3mm PLA only | |3mm PLA only | ||
|- | |- | ||
!Performance State | !Performance State | ||
|Hardware: works well | |Hardware: works well | ||
Software: | Software: OctoPrint works well | ||
|Hardware: | |Hardware: works well | ||
Software: | Software: OctoPrint works well | ||
|- | |- | ||
!Pending tasks | !Pending tasks | ||
| | | | ||
| | | | ||
|- | |- | ||
Line 44: | Line 44: | ||
Rob found a Toronto wholesaler [http://www.dynamishobbies.com/ DynamisHobbies.com] who left a sample spool of 1.75mm at the lab. | Rob found a Toronto wholesaler [http://www.dynamishobbies.com/ DynamisHobbies.com] who left a sample spool of 1.75mm at the lab. | ||
All PLA is hygroscopic (water absorbing) and exposure to moisture over time degrades the material. We have a (mostly) airtight latching storage bin with desiccant (CaCl | All PLA is hygroscopic (water absorbing) and exposure to moisture over time degrades the material. We have a (mostly) airtight latching storage bin with desiccant (CaCl{{sub|2}}) to reduce moisture internally. Store PLA inside this bin, keep it closed and open it only when needed. | ||
NB: ABS and other mystery inventory is stored in this bin as well! | NB: ABS and other mystery inventory is stored in this bin as well! | ||
Line 63: | Line 63: | ||
|1.65mm | |1.65mm | ||
|Couple meters left. Came with the Type A | |Couple meters left. Came with the Type A | ||
|- | |||
|Green, 1.75mm | |||
| | |||
| | |||
|- | |- | ||