111
edits
Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
no edit summary
(→Status) |
No edit summary |
||
| Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
*Last known good settings: (06-Jun-2017) 40 mm/s, 220 deg, 110% flow, nozzle size 0.3mm | *'''Last known good settings''': (06-Jun-2017) 40 mm/s, 220 deg, 110% flow, nozzle size 0.3mm | ||
* Operational ... it can be '''Problematic''' | * Operational ... it can be '''Problematic''' | ||
**Make sure the black peice of the extruder is behind the white zip tie and is contacting the filament!!! Shove that red wedge in good so it doesn't slip out of place | **Make sure the black peice of the extruder is behind the white zip tie and is contacting the filament!!! Shove that red wedge in good so it doesn't slip out of place | ||