Ultimaker Operation Manual: Difference between revisions

Jump to navigation Jump to search

Ultimaker Operation Manual (view source)

Revision as of 16:14, 27 September 2015

717 bytes removed ,  27 September 2015
Removed dead instructions
(Removed dead instructions)
 
Line 24: Line 24:


'''Remember to disconnect or turn the printer off!!''' If left on for extended periods at high temperature, the extruder will clog with burnt plastic and will require extensive repairs. Do '''NOT''' use screen unless you can devote your night to babysitting the printer.
'''Remember to disconnect or turn the printer off!!''' If left on for extended periods at high temperature, the extruder will clog with burnt plastic and will require extensive repairs. Do '''NOT''' use screen unless you can devote your night to babysitting the printer.
== SSH ==
The RaspberryPi running the ultimaker is accessed at ultimaker.hacklab.to or 192.168.111.23
User is: <code>hacklab</code>
Password is: <code>hacklab</code>
== SCP ==
Upload G-Code using SCP or WinSCP if you need to.
<code>scp <your file>.gcode hacklab@ultimaker.hacklab.to:</code>
Let's try to keep the main folder uncluttered so if you're using the Ultimaker a lot, please make your own folder /home/hacklab/<username> and stick stuff in there. The RaspberryPi does have limited space so clean up after yourselves. We might use LDAP or simple SSH mounts to your shell.hacklab.to user accounts soon.
== pronsole ==
The in-terminal help function is very useful. More details to come if people need it.




F3ndot
94

edits

Retrieved from "https://knowledge.hacklab.to/wiki/Special:MobileDiff/814"

Navigation menu