Automated Plant Feeder: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
[[File:plantpano.jpg]]
[[File:plantpano.jpg]]
So, a while ago ago I had this crazy idea about how it might be nice to create an automated plant waterer for hacklab, so as to keep planty things alive for greater than O(about a week). Around the same time, I was lucky enough to scavenge some (functional) peristaltic pumps from equipment at work that was decommissioned about being tossed, so I brought them in to hacklab with the idea to make this happen at some point. More recently, we heard about a "hack your space" competition for makerspaces, [http://1sheeld.com/makerspaces/ offered by 1sheeld], who make a smartphone controllable, multipurpose arduino shield that could be used for the purpose of controlling / interacting with the plant watering system. Hence, this proposal (which I'm writing for the second time, thanks to my inability to properly hit "save page" :P
 
So, a while ago ago I had this crazy idea about how it might be nice to create an automated plant waterer for HackLab, so as to keep planty things alive for greater than O(about a week). Around the same time, I was lucky enough to scavenge some (functional) peristaltic pumps from equipment at work that was decommissioned about being tossed, so I brought them in to HackLab with the idea to make this happen at some point. More recently, we heard about a "hack your space" competition for makerspaces, [http://1sheeld.com/makerspaces/ offered by 1sheeld], who make a smartphone controllable, multipurpose Arduino shield that could be used for the purpose of controlling / interacting with the plant watering system. Hence, this proposal (which I'm writing for the second time, thanks to my inability to properly hit "save page" :P


= Proposal =  
= Proposal =  


I would like to build an automated plant watering system for the lab, that people could access from the 1Sheeld app to provide the plants with water. I have some spare peristaltic pumps I have harvested from some discarded equipment, that I will connect to a water reservoir, with the pumps controlled by the arduino and 1sheeld. We can then set up a placard telling people how to "give the plants some love" by installing the 1sheeld app on their phone and watering. We may include a daily counter or something of the like so that there won't be over-watering :)
I would like to build an automated plant watering system for the lab, that people could access from the 1Sheeld app to provide the plants with water. I have some spare peristaltic pumps I have harvested from some discarded equipment, that I will connect to a water reservoir, with the pumps controlled by the Arduino and 1Sheeld. We can then set up a placard telling people how to "give the plants some love" by installing the 1Sheeld app on their phone and watering. We may include a daily counter or something of the like so that there won't be over-watering :)


= What we have =  
= What we have =  
* peristaltic pumps ([https://youtu.be/wCjZatDsfN0 that are functional!])
* Peristaltic pumps ([https://youtu.be/wCjZatDsfN0 that are functional!])
* tubing of various sizes, and a couple of reservoirs that could be used
* Tubing of various sizes, and a couple of reservoirs that could be used
* power supply, harvested from the same machine
* Power supply, harvested from the same machine
* Arduino and 1sheeld
* Arduino and 1Sheeld


All are located in a bulk barn bag, which I have put back up in the storage area above the DIYBio area for now, though if we get started on the project, maybe it can live in my or someone's box, or a spare project box of some sort.
All are located in a bulk barn bag, which I have put back up in the storage area above the DIYBio area for now, though if we get started on the project, maybe it can live in my or someone's box, or a spare project box of some sort.
Line 18: Line 19:
This likely won't be tremendously difficult project, it's more a factor of figuring out how we're going to accomplish it, wire (and connect tubes) together appropriately, and make it look pretty as well as functional
This likely won't be tremendously difficult project, it's more a factor of figuring out how we're going to accomplish it, wire (and connect tubes) together appropriately, and make it look pretty as well as functional
* Your help!
* Your help!
As many can probably tell you, I (Trevor) am pretty bad at actually getting to hacklab on a regular basis, as much as I would like to life seems to often get in the way. Nevertheless I don't want this project to sit around forever as I feel like it could be a useful addition to the lab. This is also a nice way of venturing into wetlab style / liquid handling activities, that may come in handy for users of the photography darkroom or diybio areas of hacklab. So it would be great if others who may be interested in this project could participate and help out, either in planning, building, or otherwise supporting the activity.
As many can probably tell you, I (Trevor) am pretty bad at actually getting to HackLab on a regular basis, as much as I would like to life seems to often get in the way. Nevertheless I don't want this project to sit around forever as I feel like it could be a useful addition to the lab. This is also a nice way of venturing into wetlab style / liquid handling activities, that may come in handy for users of the photography darkroom or DIYBio areas of HackLab. So it would be great if others who may be interested in this project could participate and help out, either in planning, building, or otherwise supporting the activity.
* Perhaps some embedded sensors in the plant soil to measure water content / resistivity (like those at [http://myplantlink.com My Plant Link] - though I have a feeling that a resistivity sensor of some kind would work just fine, suggestions welcome)
* Perhaps some embedded sensors in the plant soil to measure water content / resistivity (like those at [http://myplantlink.com My Plant Link] - though I have a feeling that a resistivity sensor of some kind would work just fine, suggestions welcome)
* A nice enclosure of some sort would be nice to house the final product - perhaps cut on the laser cutter, for coolness factor, and as it lives right around the corner from the plants. Yay lab things working with other lab things!  :)
* A nice enclosure of some sort would be nice to house the final product - perhaps cut on the laser cutter, for coolness factor, and as it lives right around the corner from the plants. Yay lab things working with other lab things!  :)




= Progress to date =  
= Progress to date =  
* February-ish: brought peristaltic pumps into hacklab
* February-ish: brought peristaltic pumps into HackLab
* April-ish: Submitted hack your space competition proposal, received 1sheeld in mail,
* April-ish: Submitted hack your space competition proposal, received 1Sheeld in mail,
* May 26: Came to open house, brought 1sheeld, tested out pumps ([https://youtu.be/wCjZatDsfN0 they work!])
* May 26: Came to open house, brought 1Sheeld, tested out pumps ([https://youtu.be/wCjZatDsfN0 they work!])


= Deadlines to keep in mind =
= Deadlines to keep in mind =
Should we wish to enter the 1sheeld competition (which, along with the shield, also provides a free year of access to [http://codebender.cc/ codebender] to host any code developed for this project, and the potential of winning an arduino 3d printer), the deadline for that competition is June 16th. But even if we don't make it in, I think it's a worthy endeavour to make happen, particularly if it turns out to be a warm summer, to keep the plants happy.  :)
Should we wish to enter the 1Sheeld competition (which, along with the shield, also provides a free year of access to [http://codebender.cc/ codebender] to host any code developed for this project, and the potential of winning an Arduino 3d printer), the deadline for that competition is June 16, 2015. But even if we don't make it in, I think it's a worthy endeavour to make happen, particularly if it turns out to be a warm summer, to keep the plants happy.  :)


Please feel free to contact me via the lab discussion e-mail list, or directly, if you are interested in helping / contributing / supporting!
Please feel free to contact me via the lab discussion e-mail list, or directly, if you are interested in helping / contributing / supporting!


Here's a picture of the 3 pumps and other parts we have now. Again, living in bulk barn bag above DIYBio corner of the hacklab classroom.
Here's a picture of the 3 pumps and other parts we have now. Again, living in bulk barn bag above DIYBio corner of the HackLab classroom.


[[File:Pumps.jpg]]
[[File:Pumps.jpg]]
[[Category:Equipment]]
[[Category:Projects]]

Latest revision as of 07:17, 16 January 2019

So, a while ago ago I had this crazy idea about how it might be nice to create an automated plant waterer for HackLab, so as to keep planty things alive for greater than O(about a week). Around the same time, I was lucky enough to scavenge some (functional) peristaltic pumps from equipment at work that was decommissioned about being tossed, so I brought them in to HackLab with the idea to make this happen at some point. More recently, we heard about a "hack your space" competition for makerspaces, offered by 1sheeld, who make a smartphone controllable, multipurpose Arduino shield that could be used for the purpose of controlling / interacting with the plant watering system. Hence, this proposal (which I'm writing for the second time, thanks to my inability to properly hit "save page" :P

Proposal

I would like to build an automated plant watering system for the lab, that people could access from the 1Sheeld app to provide the plants with water. I have some spare peristaltic pumps I have harvested from some discarded equipment, that I will connect to a water reservoir, with the pumps controlled by the Arduino and 1Sheeld. We can then set up a placard telling people how to "give the plants some love" by installing the 1Sheeld app on their phone and watering. We may include a daily counter or something of the like so that there won't be over-watering :)

What we have

  • Peristaltic pumps (that are functional!)
  • Tubing of various sizes, and a couple of reservoirs that could be used
  • Power supply, harvested from the same machine
  • Arduino and 1Sheeld

All are located in a bulk barn bag, which I have put back up in the storage area above the DIYBio area for now, though if we get started on the project, maybe it can live in my or someone's box, or a spare project box of some sort.

What we need

  • Various bits of clue / (perhaps more tubing and stuff) to string the various bits together.

This likely won't be tremendously difficult project, it's more a factor of figuring out how we're going to accomplish it, wire (and connect tubes) together appropriately, and make it look pretty as well as functional

  • Your help!

As many can probably tell you, I (Trevor) am pretty bad at actually getting to HackLab on a regular basis, as much as I would like to life seems to often get in the way. Nevertheless I don't want this project to sit around forever as I feel like it could be a useful addition to the lab. This is also a nice way of venturing into wetlab style / liquid handling activities, that may come in handy for users of the photography darkroom or DIYBio areas of HackLab. So it would be great if others who may be interested in this project could participate and help out, either in planning, building, or otherwise supporting the activity.

  • Perhaps some embedded sensors in the plant soil to measure water content / resistivity (like those at My Plant Link - though I have a feeling that a resistivity sensor of some kind would work just fine, suggestions welcome)
  • A nice enclosure of some sort would be nice to house the final product - perhaps cut on the laser cutter, for coolness factor, and as it lives right around the corner from the plants. Yay lab things working with other lab things!  :)


Progress to date

  • February-ish: brought peristaltic pumps into HackLab
  • April-ish: Submitted hack your space competition proposal, received 1Sheeld in mail,
  • May 26: Came to open house, brought 1Sheeld, tested out pumps (they work!)

Deadlines to keep in mind

Should we wish to enter the 1Sheeld competition (which, along with the shield, also provides a free year of access to codebender to host any code developed for this project, and the potential of winning an Arduino 3d printer), the deadline for that competition is June 16, 2015. But even if we don't make it in, I think it's a worthy endeavour to make happen, particularly if it turns out to be a warm summer, to keep the plants happy.  :)

Please feel free to contact me via the lab discussion e-mail list, or directly, if you are interested in helping / contributing / supporting!

Here's a picture of the 3 pumps and other parts we have now. Again, living in bulk barn bag above DIYBio corner of the HackLab classroom.