Darkroom/Timer: Difference between revisions

Jump to navigation Jump to search
Initial notes.
(Created page with "The darkroom at the lab has a custom talking timer which understands multi-step processes and talks so that it is easy to use even in darkness. == Components == * Timer itsel...")
 
(Initial notes.)
Line 7: Line 7:
* Speaker above the timer
* Speaker above the timer
* Control panel below the sink with the following controls:
* Control panel below the sink with the following controls:
** Large green Select button
** Large green SELECT button
** Navigation left/right control
** Navigation left/right control
** Active/Standby toggle switch
** Active/Standby toggle switch
Line 13: Line 13:
== Instructions ==
== Instructions ==
* Set the Active/Standby switch on the timer control panel to Active
* Set the Active/Standby switch on the timer control panel to Active
* Scan a barcode under the crosshairs that appear on the wall
* Scan the barcode for the process you want under the crosshairs that appear on the wall
* Press SELECT TODO
** Barcodes
* Double check that the timer is displaying the process you want to run, and press the big green SELECT button
* The timer may ask if you want to adjust the time for specific steps.
** If you don't, just press SELECT.
** If you do, use the navigation buttons to change to Yes and press SELECT.
* The timer will show and read out each step as it's ready.
* Press SELECT to start each step.
** If you want to run a different step instead, use the navigation buttons to scroll through.
* To abort a step in progress, hold the SELECT button until you hear a buzzer.


To generate new barcodes, you can use the [http://htmlpreview.github.io/?https://github.com/hacklabto/darkroomtimer/blob/master/generator/timergen.html Darkroom Timer Barcode Generator]
To generate new barcodes, you can use the [http://htmlpreview.github.io/?https://github.com/hacklabto/darkroomtimer/blob/master/generator/timergen.html Darkroom Timer Barcode Generator]
56

edits

Navigation menu