3D Printers/FlashForge Creator Pro: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
(Removed extraneous exclamation mark)
(Added maintenance log section)
Line 28: Line 28:
File -> Open Network Stream
File -> Open Network Stream
rtsp://admin:@192.168.111.44:554/user=admin&password=&channel=1&stream=0.sdp
rtsp://admin:@192.168.111.44:554/user=admin&password=&channel=1&stream=0.sdp
== Maintenance Log ==
Most recent entries at the top.
{| cellpadding="5" cellspacing="0" border="1"
!Date
!Notes
!Entry By
|-
| Dec 29, 2016
| Bed level adjusted. Heated bed support needs to be disassembled and left front (my left) leveling assembly needs to be readjusted
| Alex V.
|-
| Nov 29, 2016
| Right Extruder cleaned, Left Extruder should be clean too
| Rana
|-
|}

Revision as of 00:08, 30 December 2016

FlashForge Creator Pro

Status

Operational

Usage

Creator Pro uses different toolchain than the rest of the printers in the lab, because Makerbot. Fortunately it is still possible to use open-source toolchain based on Slic3r

Detailed instructions are here -- http://data.flamy.ca/printer_config/doc/cretor_pro_config.html

Slic3r Settings

It is still possible to use cura, just edit and save your models with STL, then load them into Slic3r and print

Octoprint at octopi4.hacklab.to

Camera Stream

Open with VLC File -> Open Network Stream rtsp://admin:@192.168.111.44:554/user=admin&password=&channel=1&stream=0.sdp


Maintenance Log

Most recent entries at the top.

Date Notes Entry By
Dec 29, 2016 Bed level adjusted. Heated bed support needs to be disassembled and left front (my left) leveling assembly needs to be readjusted Alex V.
Nov 29, 2016 Right Extruder cleaned, Left Extruder should be clean too Rana
Retrieved from "https://knowledge.hacklab.to//index.php?title=3D_Printers/FlashForge_Creator_Pro&oldid=1106"