3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 18:54, 16 April 2017
, 16 April 2017→Usage
(→Usage) |
|||
| Line 23: | Line 23: | ||
== Usage == | == Usage == | ||
Creator Pro uses different toolchain than the rest of the printers in the lab | Creator Pro uses different toolchain than the rest of the printers in the lab. This printer is based on one of Makerbot printers and Makerbot as a company would rather have you use Windows-only makerbod-approved software. | ||
However, it is possible, to use the printer with open source toolchain based on Slic3r. [https://github.com/prusa3d/Slic3r/releases Slic3r Prusa Edition] is highly recommended. | |||
Detailed instructions are here -- http://data.flamy.ca/printer_config/doc/cretor_pro_config.html | Detailed instructions are here -- http://data.flamy.ca/printer_config/doc/cretor_pro_config.html | ||
It is still possible to use makerbot software, just generate an .x3g file instead of .gcode and upload it to octoprint | |||
==Slic3r Settings== | ==Slic3r Settings== | ||