3D Printers/FlashForge Creator Pro: Difference between revisions

Jump to navigation Jump to search

3D Printers/FlashForge Creator Pro (view source)

Revision as of 04:14, 12 January 2019

88 bytes removed ,  12 January 2019
→‎Print Settings
Line 157: Line 157:
See https://github.com/prusa3d/Slic3r-settings
See https://github.com/prusa3d/Slic3r-settings


==Print Settings==
==A few printing tips from the previous page for this printer==
 
These are general printer settings that work. If filament has different temperature settings, follow filament temperature settings.


Smaller prints will better adhere to the bed than larger prints. If the print hasn't failed in the first 10% of the print job, it will be unlikely to fail after that.
Smaller prints will better adhere to the bed than larger prints. If the print hasn't failed in the first 10% of the print job, it will be unlikely to fail after that.
Retrieved from "https://knowledge.hacklab.to/wiki/Special:MobileDiff/1672"

Navigation menu