114
edits
3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
→Maintenance Log
| Line 206: | Line 206: | ||
!Notes | !Notes | ||
!Entry By | !Entry By | ||
|- | |||
| June 12, 2019 | |||
| Y-axis appeared to be skipping steps, but we found that there was a set screw loose on the timing pulley on one of the sides, so the whole gantry was driven by the belt on one side only. We tightened the set screw and squared the axis. Also, we flipped the timing belt pulley (hub toward the motor) on the Y axis motor so that the belt doesn't touch the motor flange. It's harder to access but it's tightened well and hopefully you won't have to tighten it again. We also retightened all the other belts for good measure. It works well now. | |||
| Misha | |||
|- | |- | ||