3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 18:01, 28 January 2020
, 28 January 2020→Slic3r Settings
(→Status: update Octoprint url) |
|||
| Line 153: | Line 153: | ||
*** GCC 4.9 needs to be installed. See https://askubuntu.com/questions/466651/how-do-i-use-the-latest-gcc-on-ubuntu <br /> | *** GCC 4.9 needs to be installed. See https://askubuntu.com/questions/466651/how-do-i-use-the-latest-gcc-on-ubuntu <br /> | ||
*** Then the .AppImage file can just be downloaded, marked as executable, and run. | *** Then the .AppImage file can just be downloaded, marked as executable, and run. | ||
* Load config -- | * Load config and config bundle into Slic3r from this archive -- https://knowledge.hacklab.to/w/images/e/e9/Flashforge_slic3r_configs.zip | ||
***a copy of these two .ini files can be found on the SD card in the printer | ***a copy of these two .ini files can be found on the SD card in the printer | ||
* Select File -> Quck Slice and Save As.. or click on 'Send To Printer' | * Select File -> Quck Slice and Save As.. or click on 'Send To Printer' | ||