111
edits
3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 01:13, 9 August 2018
, 9 August 2018→Lokbuild Print Surface
| Line 61: | Line 61: | ||
*May also clean with <10% isopropyl alcohol. | *May also clean with <10% isopropyl alcohol. | ||
*DO NOT put acetone on surface or high % isopropyl, this is will damage the surface. | *DO NOT put acetone on surface or high % isopropyl, this is will damage the surface. | ||
----- | |||
If your material is not compatible with lokbuild, put tape on top of it, then put hairspray or glue stick or whatever. | |||
==Cura 3 Settings for this Printer== | ==Cura 3 Settings for this Printer== | ||