111
edits
3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 17:21, 10 August 2018
, 10 August 2018→Status
(→Status) |
|||
| Line 8: | Line 8: | ||
* [[FlashForge_Creator_Pro#SD Card|Or print without OctoPrint using the SD Card]] | * [[FlashForge_Creator_Pro#SD Card|Or print without OctoPrint using the SD Card]] | ||
</onlyinclude> | </onlyinclude> | ||
{| cellpadding="5" cellspacing="0" border="1" | |||
!Date | |||
!Filament type, colour, brand | |||
!First layer | |||
!Other layers | |||
!Notes | |||
|- | |||
| Aug 10, 2018 | |||
| 3D Solutech PLA, white | |||
| Nozzle: 215, Bed: off | |||
| Nozzle: 205, Bed: off | |||
| Extrusion multiplier at 0.925. Put fans on it! | |||
|- | |||
|} | |||
*Last Known Good Settings: White solutech PLA - First layer: 220 deg, Rest of layers: 210 deg. No heated bed. Extrusion multiplier 1, but it seems to be over extruding just a little, can try .975 | *Last Known Good Settings: White solutech PLA - First layer: 220 deg, Rest of layers: 210 deg. No heated bed. Extrusion multiplier 1, but it seems to be over extruding just a little, can try .975 | ||