3D Printers/FlashForge Creator Pro: Difference between revisions

Jump to navigation Jump to search
Line 14: Line 14:
!Date
!Date
!Filament type, colour, brand
!Filament type, colour, brand
!<span style="{{Transform-rotate|270}}">First Layer</span>
!First layer
!Other layers
!Other layers
!Notes
!Notes
Line 23: Line 23:
| Nozzle: 240, Bed: 110
| Nozzle: 240, Bed: 110
| Nozzle: 240, Bed: 110
| Nozzle: 240, Bed: 110
| DO NOT use enclosed chamber. Weird, I know. Put a fan on it after the 1st layer. 1st layer may be wavy, you may have to slow down the 1st layer speed to like 15-20 mm/s, or perhaps maybe the bed's too hot?? .....  (╯⊙﹏⊙)╯︵ ┴─┴
| DO NOT use enclosed chamber. Weird, I know. Put a fan on it after the 1st layer. 1st layer may be wavy, you may have to slow down the 1st layer speed to like 15-20 mm/s, or perhaps maybe the bed's too hot?? **biting nails emoji**
Thanks to Zach for suggesting not to use an enclosed chamber, it was driving me flipping insane.  
Thanks to Zach for suggesting not to use an enclosed chamber, it was driving me flipping insane......  (╯⊙﹏⊙)╯︵ ┴─┴
|-
|-


Line 31: Line 31:
| Nozzle: 235, Bed: 110
| Nozzle: 235, Bed: 110
| Nozzle: 230, Bed: 110
| Nozzle: 230, Bed: 110
| Use enclosed chamber. Settings still not tweaked precisely, may over-extrude. Try lowering the temp by 5 deg, or set extrusion to 0.95.
| Use enclosed chamber. Works decently but these settings are still not tweaked precisely, may over-extrude. Try lowering the temp by 5 C, or set extrusion to 0.95.
|-
|-


Navigation menu