3D Printers/FlashForge Creator Pro: Revision history

26 February 2024

• curprev 23:3023:30, 26 February 2024‎ Atrain talk contribs‎ 15,465 bytes +146‎ No edit summary

5 February 2023

• curprev 21:0121:01, 5 February 2023‎ Revident talk contribs‎ m 15,319 bytes 0‎ Revident moved page FlashForge Creator Pro to 3D Printers/FlashForge Creator Pro

1 July 2020

• curprev 03:0503:05, 1 July 2020‎ Revident talk contribs‎ m 15,319 bytes −1‎ →‎Status
• curprev 02:4402:44, 1 July 2020‎ Revident talk contribs‎ 15,320 bytes +197‎ Update machine log to reflect poor working state.

28 January 2020

• curprev 18:1218:12, 28 January 2020‎ Chalmers talk contribs‎ 15,123 bytes −164‎ →‎Usage
• curprev 18:1018:10, 28 January 2020‎ Chalmers talk contribs‎ 15,287 bytes +31‎ →‎Status
• curprev 18:0918:09, 28 January 2020‎ Chalmers talk contribs‎ 15,256 bytes 0‎ →‎Status
• curprev 18:0918:09, 28 January 2020‎ Chalmers talk contribs‎ 15,256 bytes +7‎ →‎Status
• curprev 18:0818:08, 28 January 2020‎ Chalmers talk contribs‎ 15,249 bytes +23‎ →‎Status
• curprev 18:0718:07, 28 January 2020‎ Chalmers talk contribs‎ 15,226 bytes +378‎ →‎Status
• curprev 18:0218:02, 28 January 2020‎ Chalmers talk contribs‎ 14,848 bytes −3‎ →‎Slic3r Settings
• curprev 18:0118:01, 28 January 2020‎ Chalmers talk contribs‎ 14,851 bytes −39‎ →‎Slic3r Settings

24 July 2019

• curprev 00:4300:43, 24 July 2019‎ Allen talk contribs‎ 14,890 bytes +3‎ →‎Status: update Octoprint url

12 June 2019

• curprev 14:4014:40, 12 June 2019‎ Misha talk contribs‎ 14,887 bytes +536‎ Added maintenance journal entry
• curprev 14:3414:34, 12 June 2019‎ Misha talk contribs‎ 14,351 bytes +572‎ →‎Maintenance Log

16 January 2019

• curprev 18:4618:46, 16 January 2019‎ Ran0 talk contribs‎ 13,779 bytes +375‎ →‎Maintenance Log
• curprev 07:2507:25, 16 January 2019‎ Misha talk contribs‎ 13,404 bytes +26‎ No edit summary

12 January 2019

• curprev 08:3108:31, 12 January 2019‎ Ran0 talk contribs‎ 13,378 bytes +5‎ →‎A few random printing tips
• curprev 08:3008:30, 12 January 2019‎ Ran0 talk contribs‎ 13,373 bytes +288‎ →‎A few random printing tips
• curprev 08:2008:20, 12 January 2019‎ Ran0 talk contribs‎ 13,085 bytes +50‎ →‎Glass Print Plate Usage
• curprev 08:1608:16, 12 January 2019‎ Ran0 talk contribs‎ 13,035 bytes −3‎ →‎Features
• curprev 06:4706:47, 12 January 2019‎ Ran0 talk contribs‎ 13,038 bytes +1‎ →‎Status
• curprev 06:3806:38, 12 January 2019‎ Ran0 talk contribs‎ 13,037 bytes +46‎ →‎Status
• curprev 06:3806:38, 12 January 2019‎ Ran0 talk contribs‎ 12,991 bytes +4‎ →‎Status
• curprev 06:2606:26, 12 January 2019‎ Ran0 talk contribs‎ 12,987 bytes +7‎ →‎Status
• curprev 06:2506:25, 12 January 2019‎ Ran0 talk contribs‎ 12,980 bytes +1‎ →‎Status
• curprev 06:2506:25, 12 January 2019‎ Ran0 talk contribs‎ 12,979 bytes +67‎ →‎Status
• curprev 05:0105:01, 12 January 2019‎ Ran0 talk contribs‎ 12,912 bytes +210‎ →‎A few printing tips from the previous page for this printer
• curprev 04:5804:58, 12 January 2019‎ Ran0 talk contribs‎ 12,702 bytes −5‎ →‎SD Card
• curprev 04:5704:57, 12 January 2019‎ Ran0 talk contribs‎ 12,707 bytes +1,480‎ No edit summary
• curprev 04:1604:16, 12 January 2019‎ Ran0 talk contribs‎ 11,227 bytes +29‎ →‎Features
• curprev 04:1404:14, 12 January 2019‎ Ran0 talk contribs‎ 11,198 bytes −88‎ →‎Print Settings
• curprev 04:1204:12, 12 January 2019‎ Ran0 talk contribs‎ 11,286 bytes +16‎ →‎Maintenance Log
• curprev 04:1104:11, 12 January 2019‎ Ran0 talk contribs‎ 11,270 bytes −2,382‎ →‎Print Settings
• curprev 04:1004:10, 12 January 2019‎ Ran0 talk contribs‎ 13,652 bytes −2,226‎ →‎Lokbuild Print Surface
• curprev 04:0904:09, 12 January 2019‎ Ran0 talk contribs‎ 15,878 bytes +98‎ →‎Status
• curprev 04:0704:07, 12 January 2019‎ Ran0 talk contribs‎ 15,780 bytes +483‎ →‎Status
• curprev 03:5103:51, 12 January 2019‎ Ran0 talk contribs‎ 15,297 bytes +69‎ →‎Maintenance Log
• curprev 03:4903:49, 12 January 2019‎ Ran0 talk contribs‎ 15,228 bytes +985‎ →‎Maintenance Log
• curprev 03:3903:39, 12 January 2019‎ Ran0 talk contribs‎ 14,243 bytes +79‎ →‎Maintenance Resources

9 September 2018

• curprev 20:4520:45, 9 September 2018‎ Allen talk contribs‎ 14,164 bytes 0‎ →‎Cura 3 Settings for this Printer: SETTINGS FIX! ... x is 226mm NOT 266mm !!!
• curprev 19:5219:52, 9 September 2018‎ Allen talk contribs‎ m 14,164 bytes +2‎ →‎Usage: text formatting fix
• curprev 19:5119:51, 9 September 2018‎ Allen talk contribs‎ 14,162 bytes +124‎ →‎Usage: and note about Cura 3.4.1 settings

10 August 2018

• curprev 17:2817:28, 10 August 2018‎ Ran0 talk contribs‎ 14,038 bytes +63‎ →‎Lokbuild Print Surface
• curprev 17:2717:27, 10 August 2018‎ Ran0 talk contribs‎ 13,975 bytes +19‎ →‎Lokbuild Print Surface
• curprev 17:2217:22, 10 August 2018‎ Ran0 talk contribs‎ 13,956 bytes −167‎ →‎Status
• curprev 17:2117:21, 10 August 2018‎ Ran0 talk contribs‎ 14,123 bytes +266‎ →‎Status

9 August 2018

• curprev 20:0320:03, 9 August 2018‎ Ran0 talk contribs‎ 13,857 bytes +86‎ →‎Lokbuild Print Surface
• curprev 01:1301:13, 9 August 2018‎ Ran0 talk contribs‎ 13,771 bytes +125‎ →‎Lokbuild Print Surface
• curprev 01:1201:12, 9 August 2018‎ Ran0 talk contribs‎ 13,646 bytes +5‎ →‎Lokbuild Print Surface
• curprev 01:1101:11, 9 August 2018‎ Ran0 talk contribs‎ 13,641 bytes +220‎ →‎Lokbuild Print Surface
• curprev 01:0701:07, 9 August 2018‎ Ran0 talk contribs‎ 13,421 bytes +1,708‎ No edit summary
• curprev 00:4900:49, 9 August 2018‎ Ran0 talk contribs‎ 11,713 bytes +70‎ →‎Features
• curprev 00:4800:48, 9 August 2018‎ Ran0 talk contribs‎ 11,643 bytes +111‎ →‎Maintenance Log
• curprev 00:4600:46, 9 August 2018‎ Ran0 talk contribs‎ 11,532 bytes +1‎ →‎Status
• curprev 00:4600:46, 9 August 2018‎ Ran0 talk contribs‎ 11,531 bytes +196‎ →‎Status

8 August 2018

• curprev 23:2123:21, 8 August 2018‎ Ran0 talk contribs‎ 11,335 bytes −139‎ →‎Status

25 July 2018

• curprev 01:3801:38, 25 July 2018‎ Allen talk contribs‎ 11,474 bytes +407‎ →‎Cura 3 Settings for this Printer: start adding settings for the FlashForge
• curprev 01:2901:29, 25 July 2018‎ Allen talk contribs‎ 11,067 bytes +1,828‎ Add Cura 3 settings section. (copy from Type A)

14 June 2018

• curprev 06:5706:57, 14 June 2018‎ Allen talk contribs‎ 9,239 bytes +263‎ →‎Maintenance Log: Filament will not unload.
• curprev 06:5106:51, 14 June 2018‎ Allen talk contribs‎ 8,976 bytes +141‎ →‎Status: Update for why temporarily down.

24 April 2018

• curprev 19:4119:41, 24 April 2018‎ Ran0 talk contribs‎ 8,835 bytes +77‎ →‎Slic3r Settings
• curprev 19:4019:40, 24 April 2018‎ Ran0 talk contribs‎ 8,758 bytes +62‎ →‎SD Card

22 April 2018

• curprev 23:1423:14, 22 April 2018‎ Hiker talk contribs‎ 8,696 bytes +134‎ Request for new Slicr config link

25 September 2017

• curprev 03:3903:39, 25 September 2017‎ Ran0 talk contribs‎ 8,562 bytes +319‎ →‎Print Settings

9 September 2017

• curprev 21:4521:45, 9 September 2017‎ Zacharydonsky talk contribs‎ 8,243 bytes +3‎ →‎Print Settings

18 June 2017

• curprev 11:4211:42, 18 June 2017‎ Allen talk contribs‎ 8,240 bytes +249‎ →‎Slic3r Settings: add notes to install using Ubuntu 14.04 based Linux

6 June 2017

• curprev 22:4422:44, 6 June 2017‎ Alex talk contribs‎ 7,991 bytes +2‎ →‎Maintenance Log
• curprev 22:4422:44, 6 June 2017‎ Alex talk contribs‎ 7,989 bytes +122‎ No edit summary

17 May 2017

• curprev 15:2415:24, 17 May 2017‎ Igor talk contribs‎ 7,867 bytes +44‎ →‎Status: Need page for section links, otherwise they don't work from 3D_Printers
• curprev 15:2215:22, 17 May 2017‎ Igor talk contribs‎ 7,823 bytes +31‎ Successful dual-extrusin print. OctoPi4 IP fixed. Move SD card notes into separate section to shorten status.

14 May 2017

• curprev 17:0717:07, 14 May 2017‎ Alex talk contribs‎ 7,792 bytes −27‎ No edit summary

2 May 2017

• curprev 22:3622:36, 2 May 2017‎ Alex talk contribs‎ 7,819 bytes +146‎ →‎Maintenance Log

28 April 2017

• curprev 01:0101:01, 28 April 2017‎ Ran0 talk contribs‎ 7,673 bytes +32‎ →‎Print Settings
• curprev 00:5600:56, 28 April 2017‎ Ran0 talk contribs‎ 7,641 bytes +82‎ →‎Maintenance Log
• curprev 00:5400:54, 28 April 2017‎ Ran0 talk contribs‎ 7,559 bytes +710‎ →‎Print Settins
• curprev 00:3400:34, 28 April 2017‎ Ran0 talk contribs‎ 6,849 bytes +173‎ →‎Maintenance Log

16 April 2017

• curprev 19:2119:21, 16 April 2017‎ Alex talk contribs‎ 6,676 bytes +167‎ →‎Print Settins
• curprev 19:1919:19, 16 April 2017‎ Alex talk contribs‎ 6,509 bytes +122‎ →‎Print Settins
• curprev 19:1719:17, 16 April 2017‎ Alex talk contribs‎ 6,387 bytes +27‎ →‎Print Settins
• curprev 19:1619:16, 16 April 2017‎ Alex talk contribs‎ 6,360 bytes +507‎ →‎Slic3r Settings
• curprev 19:1019:10, 16 April 2017‎ Alex talk contribs‎ 5,853 bytes +58‎ →‎Print Settins
• curprev 19:0819:08, 16 April 2017‎ Alex talk contribs‎ 5,795 bytes +535‎ →‎Print Settins
• curprev 19:0119:01, 16 April 2017‎ Alex talk contribs‎ 5,260 bytes +114‎ →‎Usage
• curprev 19:0119:01, 16 April 2017‎ Alex talk contribs‎ 5,146 bytes +288‎ →‎Print Settins
• curprev 18:5418:54, 16 April 2017‎ Alex talk contribs‎ 4,858 bytes +324‎ →‎Usage
• curprev 18:4818:48, 16 April 2017‎ Alex talk contribs‎ 4,534 bytes +7‎ →‎Slic3r Settings
• curprev 18:4718:47, 16 April 2017‎ Alex talk contribs‎ 4,527 bytes +59‎ Updated settings, recommending slic3r prusa edition by default

14 April 2017

• curprev 19:5919:59, 14 April 2017‎ Alex talk contribs‎ 4,468 bytes +28‎ Added new ip addres of octopi TODO: update dns record / static ip

13 April 2017

• curprev 04:5404:54, 13 April 2017‎ Ran0 talk contribs‎ 4,440 bytes +354‎ →‎Status

18 March 2017

• curprev 00:0000:00, 18 March 2017‎ Alex talk contribs‎ 4,086 bytes +366‎ Added print temperature for PLA and ABS

13 March 2017

• curprev 00:2600:26, 13 March 2017‎ Allen talk contribs‎ 3,720 bytes +71‎ →‎Status: update status to what I know about this printer.

19 February 2017

• curprev 21:0021:00, 19 February 2017‎ Mikep talk contribs‎ 3,649 bytes +261‎ →‎Maintenance Log

9 February 2017

• curprev 23:2523:25, 9 February 2017‎ Alex talk contribs‎ 3,388 bytes +276‎ →‎Slic3r Settings
• curprev 23:1623:16, 9 February 2017‎ Alex talk contribs‎ 3,112 bytes +229‎ →‎Maintenance Log

6 February 2017

• curprev 23:1923:19, 6 February 2017‎ Alex talk contribs‎ 2,883 bytes +143‎ →‎Features
• curprev 23:1423:14, 6 February 2017‎ Alex talk contribs‎ 2,740 bytes +108‎ →‎Maintenance Resources
• curprev 23:1223:12, 6 February 2017‎ Alex talk contribs‎ 2,632 bytes +244‎ Added Maintenance resources notes

1 February 2017

• curprev 22:0922:09, 1 February 2017‎ Igor talk contribs‎ 2,388 bytes +330‎ Add features, update status and log
• curprev 20:4720:47, 1 February 2017‎ Igor talk contribs‎ 2,058 bytes +213‎ →‎Maintenance Log: fixed right drive motor

27 January 2017

• curprev 03:3103:31, 27 January 2017‎ Alex talk contribs‎ 1,845 bytes +1‎ No edit summary
• curprev 03:3103:31, 27 January 2017‎ Alex talk contribs‎ 1,844 bytes +1‎ No edit summary
• curprev 03:3003:30, 27 January 2017‎ Alex talk contribs‎ 1,843 bytes +26‎ No edit summary
• curprev 03:3003:30, 27 January 2017‎ Alex talk contribs‎ 1,817 bytes +417‎ Added maintenance resources and log

30 December 2016

• curprev 00:1300:13, 30 December 2016‎ Alex talk contribs‎ 1,400 bytes −140‎ Camera stream no longer available
• curprev 00:0800:08, 30 December 2016‎ Alex talk contribs‎ 1,540 bytes +381‎ Added maintenance log section

29 December 2016

• curprev 23:3123:31, 29 December 2016‎ Alex talk contribs‎ 1,159 bytes −1‎ Removed extraneous exclamation mark
• curprev 23:3023:30, 29 December 2016‎ Alex talk contribs‎ 1,160 bytes −8‎ →‎Slic3r Settings

23 August 2016

• curprev 00:1500:15, 23 August 2016‎ Alex talk contribs‎ 1,168 bytes +98‎ →‎Usage
• curprev 00:0900:09, 23 August 2016‎ Alex talk contribs‎ 1,070 bytes +140‎ No edit summary

22 August 2016

• curprev 23:5023:50, 22 August 2016‎ Alex talk contribs‎ 930 bytes −33‎ No edit summary
• curprev 23:2023:20, 22 August 2016‎ Alex talk contribs‎ 963 bytes 0‎ No edit summary
• curprev 23:1923:19, 22 August 2016‎ Alex talk contribs‎ 963 bytes +963‎ Initial commit