FlashForge Creator Pro

From Hacklab.TO Public Wiki
Revision as of 18:19, 22 August 2016 by Alex (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
!
FlashForge Creator Pro

Status

Operational

Usage

Creator Pro uses different toolchain than the rest of the printers in the lab, because Makerbot. Fortunately it is still possible to use open-source toolchain based on Slic3rhttp://slic3r.org/

Slic3r Settings

It is still possible to use cura, just edit and save your models with STL, then load them into Slic3r and print

Octoprint at 192.168.111.94

Please, someone set DNS name to octopi4