Laser Manual: Difference between revisions

Jump to navigation Jump to search
→‎Converting Files: Added fusion360 postproc
(Added Manufacturer Manuals, fixed See Also links)
(→‎Converting Files: Added fusion360 postproc)
Line 238: Line 238:
=== TrueType Font Workflow ===
=== TrueType Font Workflow ===
* The [http://www.timeguy.com/cradek/truetype TrueType Tracer] is an open-source tool that takes a truetype font and some desired text, and spits out either g-code or a DXF.  This has been used to generate a DXF that was then loaded into CAM Expert to generate g-code, the direct g-code output from the tool hasn't been tried yet.
* The [http://www.timeguy.com/cradek/truetype TrueType Tracer] is an open-source tool that takes a truetype font and some desired text, and spits out either g-code or a DXF.  This has been used to generate a DXF that was then loaded into CAM Expert to generate g-code, the direct g-code output from the tool hasn't been tried yet.
=== Fusion360 Workflow ===
See: https://github.com/IgorYeremin/fusion-postproc


== Hardware Overview ==
== Hardware Overview ==

Navigation menu