Milling Machine: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 25: Line 25:
# You break it, you buy it!
# You break it, you buy it!


You '''MUST''' be trained before using this machine. Please consult a member who knows what they are doing.
You '''MUST''' be trained before using this machine. Please consult a member who knows what they are doing. You can help a guest with a job but guests are not permitted to use the machine themselves.


=== Supplies ===
=== Supplies ===

Revision as of 15:35, 31 August 2015

Hacklab has acquired a milling machine as of Aug. 29 2015!

Some things about it:

Usage & Safety

The milling machine is both a precision machine and also powerful enough to serious hurt you. It needs to be treated with the same respect you would give any precision tool. All members are welcome to use the machine after being shown how to use it properly.

  1. Only trained members may use this machine.
  2. Tie back long hair, remove long sleeved shirts and jewellery.
  3. Eye protection must be worn when machine is running.
  4. Check all tooling and machine for damage before using.
  5. Sweep / vacuum up chips and leave the machine clean.
  6. No unconventional / unsafe use, or use on non-metals.
  7. No hammering on the machine table. It is high precision!
  8. You break it, you buy it!

You MUST be trained before using this machine. Please consult a member who knows what they are doing. You can help a guest with a job but guests are not permitted to use the machine themselves.

Supplies