View source for Prusa Mini 2

== Status ==
<onlyinclude>
* '''Broken'''
* '''http://prusa-mini-2.in.hacklab.to/'''
</onlyinclude>

-----
Last Known Good Settings
{| cellpadding="5" cellspacing="0" border="1"
!Date
!Filament type, colour, brand
!First layer
!Other layers
!Notes
|-
| July 29, 2020
| Generic PETG, Red and White
|
|
| Mini # has demonstrated an intermittent problem of with it's Z position. Some runs will start at the calibrated height and z-adjustment. Others will start even lower into the bed. This as result in back pressure, causing the extruder pulley to grind the filament. This has now happened 3 times with the red PETG filament. Cleaning of the extender pulley also showed build of up the white PETG as well. The PEI print sheet has been significantly damaged from this.

A support case will be opened with Prusa. A new PEI build sheet will be ordered.

Printer should NOT be used until after the support case with Prusa is resolved. 
|-
|}