Titanium Ring: Difference between revisions

Jump to navigation Jump to search
Undo revision 439 by Up (talk)
No edit summary
(Undo revision 439 by Up (talk))
Line 27: Line 27:
Thus, I could proceed. 0.002" at a time!!!
Thus, I could proceed. 0.002" at a time!!!


[[File:800px-LatheTitanium.jpg]]
[[File:LatheTitanium.jpg]]


Here's the product fresh off the lathe!
Here's the product fresh off the lathe!


[[File:800px-TitaniumRingCoarse.jpg]]
[[File:TitaniumRingCoarse.jpg]]


So, at this point, I got the ring. Put it on.
So, at this point, I got the ring. Put it on.
Line 46: Line 46:


This is how:
This is how:
[[File::800px-WideningTheRing.jpg]]
[[File::WideningTheRing.jpg]]


I heated it up with the Propane torch, let it slide down the mandrel, tapped it a few times, bingo!!
I heated it up with the Propane torch, let it slide down the mandrel, tapped it a few times, bingo!!
Line 53: Line 53:


This is how lazy people polish rings:
This is how lazy people polish rings:
 
[[File::PolishingTheRing.jpg]]
[[File:450px-PolishingTheRing.jpg]]


That's a piece of foam I shoved the ring on. Then stuffed it into a drill bit. Then held some high-grit sandpaper to the spinning deely.
That's a piece of foam I shoved the ring on. Then stuffed it into a drill bit. Then held some high-grit sandpaper to the spinning deely.
19

edits

Navigation menu