Type A: Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

curprev 02:4202:42, 1 July 2020‎ Revident talk contribs‎ 30,166 bytes +173‎ Retired Printer

curprev 05:2105:21, 18 January 2019‎ Allen talk contribs‎ 29,993 bytes +2‎ →‎Parts and Supplies Wish List: change part # for "cheaper" packing format of same part
curprev 05:1605:16, 18 January 2019‎ Allen talk contribs‎ 29,991 bytes +4‎ →‎Parts and Supplies Wish List: typo fix.
curprev 05:1205:12, 18 January 2019‎ Allen talk contribs‎ 29,987 bytes +705‎ →‎Parts and Supplies Wish List: added Printhead & Fan connector parts

curprev 07:0907:09, 18 November 2018‎ Allen talk contribs‎ 29,282 bytes +137‎ →‎Recommended Filament Settings: update for WHY given PETG layer heights
curprev 07:0307:03, 18 November 2018‎ Allen talk contribs‎ 29,145 bytes +112‎ →‎Status: update after work done & problems found
curprev 07:0107:01, 18 November 2018‎ Allen talk contribs‎ 29,033 bytes +586‎ →‎Machine Log: update for work done

curprev 00:2100:21, 8 November 2018‎ Allen talk contribs‎ m 28,447 bytes −6‎ →‎Recommended Filament Settings: formatting edit
curprev 00:1300:13, 8 November 2018‎ Allen talk contribs‎ m 28,453 bytes −2‎ →‎Recommended Filament Settings: formatting edit
curprev 00:0900:09, 8 November 2018‎ Allen talk contribs‎ 28,455 bytes +180‎ →‎Recommended Filament Settings: add travel speed note

curprev 16:2516:25, 20 September 2018‎ Allen talk contribs‎ 24,616 bytes +94‎ →‎Status: update for PROBLEM

curprev 14:4414:44, 11 September 2018‎ Allen talk contribs‎ 24,522 bytes +23‎ →‎Known Issues and Fixes: remove IPG tape note. (not using) & add NO atomic pull note.

curprev 20:1320:13, 7 September 2018‎ Allen talk contribs‎ 24,499 bytes +372‎ →‎Machine Log: update for work done.
curprev 20:0520:05, 7 September 2018‎ Allen talk contribs‎ 24,127 bytes +40‎ →‎Status: Update for current status

curprev 15:2715:27, 29 August 2018‎ Allen talk contribs‎ 24,087 bytes +354‎ →‎Machine Log
curprev 15:2315:23, 29 August 2018‎ Allen talk contribs‎ 23,733 bytes +66‎ →‎Status

curprev 21:0221:02, 22 July 2018‎ Allen talk contribs‎ 23,667 bytes +205‎ →‎Machine Log

curprev 02:2002:20, 5 July 2018‎ Allen talk contribs‎ m 23,462 bytes 0‎ →‎Recommended Filament Settings: formatting fix
curprev 02:1902:19, 5 July 2018‎ Allen talk contribs‎ 23,462 bytes +186‎ →‎Recommended Filament Settings: Add link to Legacy Cura 15.04.6 settings for PLA

curprev 06:4506:45, 14 June 2018‎ Allen talk contribs‎ 22,012 bytes +149‎ →‎Recommended Filament Settings: update for 75mm/s FASTEST speed that can be used with PLA.
curprev 06:4106:41, 14 June 2018‎ Allen talk contribs‎ 21,863 bytes +113‎ →‎Known Issues and Fixes
curprev 06:3906:39, 14 June 2018‎ Allen talk contribs‎ 21,750 bytes −234‎ →‎Status: update for Warped Print Bed replaced.
curprev 06:3706:37, 14 June 2018‎ Allen talk contribs‎ 21,984 bytes +278‎ →‎Machine Log

curprev 01:2301:23, 13 June 2018‎ Allen talk contribs‎ 21,706 bytes +58‎ →‎Cura 3 Settings for this Printer: update for Cura 3.3.1 having Printer & Extruder tabs.
curprev 00:0700:07, 13 June 2018‎ Allen talk contribs‎ 21,648 bytes 0‎ →‎Recommended Filament Settings: CORRECT Coasting Volume value

curprev 22:3222:32, 15 May 2018‎ Allen talk contribs‎ m 21,648 bytes −1‎ →‎Status: Update for filament on printer.
curprev 22:3122:31, 15 May 2018‎ Allen talk contribs‎ 21,649 bytes +112‎ →‎Known Issues and Fixes: add ipg blue tape note

curprev 04:2804:28, 27 April 2018‎ Allen talk contribs‎ 21,537 bytes +40‎ →‎Status: update based on current usage

curprev 22:0922:09, 16 March 2018‎ Allen talk contribs‎ m 21,497 bytes +25‎ →‎Recommended Filament Settings: formatting edit.
curprev 22:0322:03, 16 March 2018‎ Allen talk contribs‎ 21,472 bytes +58‎ →‎Recommended Filament Settings: small update for PETG
curprev 03:5503:55, 16 March 2018‎ Allen talk contribs‎ 21,414 bytes +170‎ →‎Machine Log: update for no axis shifts.
curprev 03:5103:51, 16 March 2018‎ Allen talk contribs‎ 21,244 bytes +992‎ →‎Recommended Filament Settings: update PETG settings base on what now using

curprev 23:5723:57, 15 March 2018‎ Allen talk contribs‎ 20,252 bytes −291‎ →‎Status: update now well tested

curprev 22:2122:21, 4 March 2018‎ Allen talk contribs‎ 20,543 bytes +536‎ →‎Machine Log: Update for rest of the work done last week.
curprev 21:4621:46, 4 March 2018‎ Allen talk contribs‎ 20,007 bytes +82‎ →‎Status: update for additional work done.

curprev 06:1606:16, 1 March 2018‎ Allen talk contribs‎ 19,925 bytes +224‎ →‎Machine Log: STILL X-AXIS SHIFTS
curprev 06:1306:13, 1 March 2018‎ Allen talk contribs‎ 19,701 bytes +58‎ →‎Status

curprev 04:2604:26, 28 February 2018‎ Allen talk contribs‎ 19,643 bytes +161‎ →‎Machine Log: adjust Y axis current

curprev 06:4506:45, 15 February 2018‎ Allen talk contribs‎ 19,482 bytes +123‎ →‎Machine Log: update for new failure mode.
curprev 05:2205:22, 15 February 2018‎ Allen talk contribs‎ 19,359 bytes +210‎ →‎Machine Log: additional info added
curprev 05:1105:11, 15 February 2018‎ Allen talk contribs‎ 19,149 bytes +1,317‎ →‎Machine Log: update for work done last week & this week.

curprev 04:5304:53, 20 December 2017‎ Allen talk contribs‎ 17,832 bytes +595‎ →‎Machine Log
curprev 04:3904:39, 20 December 2017‎ Allen talk contribs‎ 17,237 bytes +288‎ →‎Recommended Filament Settings: update for settings I now use with PETG
curprev 02:4002:40, 20 December 2017‎ Allen talk contribs‎ 16,949 bytes +442‎ →‎Recommended Filament Settings: update based on usage
curprev 02:2902:29, 20 December 2017‎ Allen talk contribs‎ 16,507 bytes +119‎ →‎Status: update based on usage

curprev 23:4623:46, 25 November 2017‎ Allen talk contribs‎ 16,724 bytes +18‎ →‎Known Issues and Fixes: add Cyclone Filament

curprev 17:3317:33, 17 November 2017‎ Allen talk contribs‎ m 16,706 bytes +3‎ →‎Recommended Filament Settings
curprev 17:2017:20, 17 November 2017‎ Allen talk contribs‎ 16,703 bytes −95‎ →‎Recommended Filament Settings: update based on use
curprev 09:1909:19, 17 November 2017‎ Allen talk contribs‎ 16,798 bytes +255‎ →‎Recommended Filament Settings: Update iPrint3D PETG based on use

curprev 00:0200:02, 13 November 2017‎ Allen talk contribs‎ 16,543 bytes +211‎ →‎Machine Log: update for what done last week

curprev 05:3705:37, 4 November 2017‎ Allen talk contribs‎ 13,690 bytes +414‎ →‎Machine Log
curprev 05:2605:26, 4 November 2017‎ Allen talk contribs‎ 13,276 bytes +121‎ →‎Status: nozzle leak (yet again).

curprev 23:3223:32, 20 October 2017‎ Allen talk contribs‎ m 12,313 bytes −12‎ →‎Recommended Filament Settings
curprev 22:2422:24, 20 October 2017‎ Allen talk contribs‎ m 12,325 bytes +12‎ →‎Recommended Filament Settings
curprev 21:4921:49, 20 October 2017‎ Allen talk contribs‎ 12,313 bytes +29‎ →‎Recommended Filament Settings: update based on use

curprev 03:2303:23, 16 October 2017‎ Allen talk contribs‎ 12,284 bytes +263‎ →‎Machine Log: make & install new filament fan

curprev 03:1003:10, 13 October 2017‎ Allen talk contribs‎ 12,021 bytes +72‎ →‎Recommended Filament Settings: update based on changes while using

curprev 20:0620:06, 7 October 2017‎ Allen talk contribs‎ 11,949 bytes +343‎ →‎Known Issues and Fixes: additional PETG filament build-up notes.
curprev 20:0120:01, 7 October 2017‎ Allen talk contribs‎ 11,606 bytes +22‎ →‎Known Issues and Fixes: typo fix
curprev 20:0020:00, 7 October 2017‎ Allen talk contribs‎ 11,584 bytes +313‎ →‎Known Issues and Fixes: check heatsink fan note.

curprev 06:4206:42, 8 September 2017‎ Allen talk contribs‎ m 11,271 bytes +5‎ →‎Recommended Filament Settings
curprev 06:4106:41, 8 September 2017‎ Allen talk contribs‎ 11,266 bytes +503‎ →‎Known Issues and Fixes: => create Filament Settings sub-section

curprev 21:3321:33, 23 August 2017‎ Allen talk contribs‎ m 7,577 bytes 0‎ →‎Known Issues and Fixes
curprev 21:2921:29, 23 August 2017‎ Allen talk contribs‎ 7,577 bytes −150‎ →‎Known Issues and Fixes: update PETG settings for new head

curprev 22:4322:43, 15 August 2017‎ Allen talk contribs‎ 7,727 bytes +310‎ →‎Machine Log

curprev 17:5017:50, 16 July 2017‎ Allen talk contribs‎ 7,417 bytes +676‎ →‎Machine Log: update for last work done & status

curprev 16:2816:28, 23 June 2017‎ Allen talk contribs‎ 6,741 bytes +318‎ →‎Machine Log: Update what happened
curprev 16:1916:19, 23 June 2017‎ Allen talk contribs‎ 6,423 bytes −10‎ →‎Status: Broken with new problem
curprev 01:2601:26, 23 June 2017‎ Allen talk contribs‎ 6,433 bytes +110‎ →‎Features: don't use over 240C
curprev 01:1901:19, 23 June 2017‎ Allen talk contribs‎ 6,323 bytes +627‎ Add Known Issues and Fixes section w/ CURA 15 PETG settings

curprev 03:4603:46, 18 June 2017‎ Allen talk contribs‎ m 5,696 bytes +52‎ →‎Machine Log: small updates.
curprev 03:4203:42, 18 June 2017‎ Allen talk contribs‎ 5,644 bytes +1,063‎ →‎Machine Log
curprev 03:1603:16, 18 June 2017‎ Allen talk contribs‎ m 4,581 bytes −1‎ →‎Features: update changed nozzle size
curprev 03:1503:15, 18 June 2017‎ Allen talk contribs‎ 4,582 bytes −110‎ →‎Status: Update based on what happened this week

curprev 19:5619:56, 27 May 2017‎ Allen talk contribs‎ m 4,692 bytes +2‎ →‎Machine Log: typo fix
curprev 17:4317:43, 27 May 2017‎ Allen talk contribs‎ 4,690 bytes +440‎ →‎Machine Log: 1st attempt to replace Grovemount & Heatbreak.
curprev 17:3017:30, 27 May 2017‎ Allen talk contribs‎ 4,250 bytes −29‎ →‎Status

curprev 19:0219:02, 1 May 2017‎ Allen talk contribs‎ 4,279 bytes +298‎ →‎Machine Log

curprev 00:2400:24, 29 March 2017‎ Ran0 talk contribs‎ 3,981 bytes +270‎ →‎Machine Log
curprev 00:2100:21, 29 March 2017‎ Ran0 talk contribs‎ 3,711 bytes +88‎ →‎Status

curprev 00:3400:34, 13 March 2017‎ Allen talk contribs‎ 3,623 bytes +1‎ →‎Status
curprev 00:3200:32, 13 March 2017‎ Allen talk contribs‎ 3,622 bytes −12‎ →‎Status: Update status to what I know about this printer.

curprev 17:4417:44, 18 February 2017‎ Mikep talk contribs‎ 3,634 bytes +100‎ →‎Machine Log

curprev 22:0022:00, 1 February 2017‎ Igor talk contribs‎ 3,534 bytes +591‎ Add features, update status and log

curprev 18:0518:05, 25 June 2016‎ F3ndot talk contribs‎ 2,943 bytes +1‎ →‎Status

curprev 05:0005:00, 18 January 2016‎ Saskeah talk contribs‎ 2,771 bytes +366‎ No edit summary

curprev 01:3901:39, 11 January 2016‎ Saskeah talk contribs‎ 2,405 bytes +17‎ No edit summary
curprev 01:3801:38, 11 January 2016‎ Saskeah talk contribs‎ 2,388 bytes +125‎ No edit summary

curprev 05:1105:11, 3 January 2016‎ Saskeah talk contribs‎ 1,548 bytes +246‎ →‎Machine Log

curprev 14:4914:49, 13 November 2015‎ Saskeah talk contribs‎ 374 bytes +262‎ No edit summary

curprev 01:4201:42, 30 June 2014‎ F3ndot talk contribs‎ 112 bytes +112‎ Created page with "thumb|300px No documentation yet! Why don't you take a stab at it? Category:3D Printers"

Type A: Revision history

1 July 2020

18 January 2019

18 November 2018

8 November 2018

7 November 2018

22 September 2018

20 September 2018

11 September 2018

7 September 2018

29 August 2018

22 July 2018

5 July 2018

20 June 2018

14 June 2018

13 June 2018

15 May 2018

27 April 2018

16 March 2018

15 March 2018

4 March 2018

1 March 2018

28 February 2018

15 February 2018

20 December 2017

15 December 2017

26 November 2017

25 November 2017

17 November 2017

13 November 2017

12 November 2017

4 November 2017

22 October 2017

20 October 2017

16 October 2017

13 October 2017

7 October 2017

8 September 2017

5 September 2017

28 August 2017

25 August 2017

23 August 2017

15 August 2017

16 July 2017

23 June 2017

18 June 2017

27 May 2017

1 May 2017

29 March 2017

13 March 2017

18 February 2017

1 February 2017

25 June 2016

28 January 2016

18 January 2016

11 January 2016

4 January 2016

3 January 2016

2 January 2016

13 November 2015

30 June 2014

Navigation menu

Search