Type A

From Hacklab.TO Public Wiki
Revision as of 01:10, 2 January 2016 by Saskeah (talk | contribs)
Jump to navigation Jump to search

This page documents Type A

Status

  • This Ultimaker is currently functional and in reasonable to good condition!
  • Uses 1.75mm PLA filament.
  • It is managed and accessible from the web GUI: http://octopi.hacklab.to/

Machine Log

Date Notes Entry By
January 1 2016 Print head not extruding. Mechanics and octopi commands seem to be working fine, but filament does not extrude from print head. Also, the Z axis is off a little, and home is slightly too close to the print head. Easily adjusted by hand. emmy