Ultimaker 1: Difference between revisions

Jump to navigation Jump to search
Update for new position, new url, and for head jam
No edit summary
Tag: Mobile edit
(Update for new position, new url, and for head jam)
Line 2: Line 2:
This page documents Ultimaker #1 (Guy).
This page documents Ultimaker #1 (Guy).


Printer lives on the third shelf of the 3D printer tower, next to the [[Type A]].
Printer lives on the second shelf of the 3D printer tower, below the [[Type A]].


==Status==
==Status==
<onlyinclude>
<onlyinclude>
* Operational
* DOWN! ... has a '''serious''' head jam, which will need cold pulls to clear/fix.
* '''Last known good settings:''' 220°, 110% flow, print 60mm/s, travel 120mm/s, retraction 4.5mm @ 40mm/s, 0.4 mm nozzle size, 2.85mm filament size.
* '''Last known good settings:''' 220°, 110% flow, print 60mm/s, travel 120mm/s, retraction 4.5mm @ 40mm/s, 0.4 mm nozzle size, 2.85mm filament size.
* Burnt Orange PLA (from Filaments.ca)
* Silver PLA (from M G Chemicals)
* Works well using Blue painter’s tape '''without''' using the heated bed. (Same setup as Ultimaker 2)
* Works well using Blue painter’s tape '''without''' using the heated bed. (Same setup as Ultimaker 2)
* [[3D_Printers#Cura_15|Cura 15 Settings here]]
* [[3D_Printers#Cura_15|Cura 15 Settings here]]
* '''http://octopi.hacklab.to/'''</onlyinclude>
* '''http://octopi.in.hacklab.to/'''</onlyinclude>


==Known Issues and Fixes==
==Known Issues and Fixes==
283

edits

Navigation menu