Ultimaker 1: Difference between revisions

Jump to navigation Jump to search
Line 5: Line 5:
==Status==
==Status==
<onlyinclude>
<onlyinclude>
* '''DOWN''' ... Thermocouple failure ... '''DO NOT USE'''.
* Operational, after a significant head cleaning. Printing well as of 24 Sept 2017.
* (????) ==> '''DOWN''' ... Thermocouple failure ... '''DO NOT USE'''.
* '''Last known good settings:''' 220°, 110% flow, print 60mm/s, travel 120mm/s, 0.4 mm nozzle size, 2.85mm filament size.
* '''Last known good settings:''' 220°, 110% flow, print 60mm/s, travel 120mm/s, 0.4 mm nozzle size, 2.85mm filament size.
* Works well using Blue painter’s tape '''without''' using the heated bed. (Same setup as Ultimaker 2)
* Works well using Blue painter’s tape '''without''' using the heated bed. (Same setup as Ultimaker 2)

Navigation menu