Status
Last Known Good Settings
| Date
|
Filament type, colour, brand
|
First layer
|
Other layers
|
Notes
|
|
|
|
|
|
Maintenance Log
Most recent entries at the top.
| Date
|
Notes
|
Entry By
|
| May 24th, 2025
|
- Discovered filament sensor disabled in menu.
- Investigation show the sensor mechaism sticking in the 'filament present' position.
- Disassembled E-Axis assembly. https://help.prusa3d.com/guide/5-e-axis-assembly_28536#28816
- Magnet in the FS-lever had migrated out of it's seated position resulting in it rubbing against the inside of the assembly body. Reseated the magnet.
- Tightened set screw for heater cartridge in heater block.
- Preformed XYZ Calibration.
- Preformed First Layer Calibration.
|
[User:Revident]
|