Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
→Machine Log: 2 fixes
m (→Features) |
(→Machine Log: 2 fixes) |
||
| Line 27: | Line 27: | ||
!Notes | !Notes | ||
!Entry By | !Entry By | ||
|- | |||
|March 9, 2017 | |||
|The Print Head Fan Duct was touching the build plate before the front/right corner was down enough to be level. Used a fine file to trim the underside of this 3D printed part, so this now stays just slightly above the build plate at all times. | |||
|Allen | |||
|- | |||
|March 1, 2017 | |||
|X axis just stopped working mid-print again. Re-seated x axis stepper board again, and this time used Kapton Tape to secure all the the stepper board DIPs in place. | |||
|Allen | |||
|- | |- | ||
|February 21, 2017 | |February 21, 2017 | ||
|Igor helped to locate & fix bad driver board (DIP socket) connections for the X axis stepper motor. Removed broken PLA from feeding tube (yet again). The working PLA reel from Ultimaker 1 was moved to this unit. | |Igor helped to locate & fix bad driver board (DIP socket) connections for the X axis stepper motor. Removed broken PLA from feeding tube (yet again). The working PLA reel from Ultimaker 1 was moved to this unit. | ||
|Allen | |Allen | ||
|- | |- | ||