251
edits
Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
→Machine Log
| Line 35: | Line 35: | ||
|April 28, 2017 | |April 28, 2017 | ||
|Tightened all the frame screws. Unwittingly tightened the tensioner screw on the rails (the middle screw of those plastic pieces on the frame) and the head would not move. Loosened them and head moves | |Tightened all the frame screws. Unwittingly tightened the tensioner screw on the rails (the middle screw of those plastic pieces on the frame) and the head would not move. Loosened them and head moves well now. | ||
The plastic connector for the printhead fan was coming in between the head and the orange rail holder, preventing homing. Secured that wire using a zip tie. | The plastic connector for the printhead fan was coming in between the head and the orange rail holder, preventing homing. Secured that wire using a zip tie. | ||
|Rana | |Rana | ||