Ultimaker 2: Difference between revisions

Jump to navigation Jump to search

Ultimaker 2 (view source)

Revision as of 17:33, 27 July 2017

152 bytes removed ,  27 July 2017
→‎Status: update for 1/2 speed to get GOOD prints.
(→‎Machine Log: work done last week)
(→‎Status: update for 1/2 speed to get GOOD prints.)
Line 6: Line 6:
==Status==
==Status==
<onlyinclude>
<onlyinclude>
*'''Last known good settings''': (16-July-2017, pink PLA) 30 mm/s, 120% flow, 220 deg, 0.4 mm nozzle size. Yea it's slow but it prints pretty well. Printed at 40 mm/s 110%, parts are structurally sound but some layers are blotchy and it doesn't look clean. Didn't try 40 mm/s 120% flow...try if you dare...
*'''Last known good settings''': (27-July-2017, Pink PLA) '''220&deg;''', 110% flow, '''25mm/s''' (half speed), 0.4 mm nozzle size, 2.85mm filament size.
* Operational ... it can be '''Problematic'''
* Operational ... it can be '''Problematic'''
** Using a Brim to hold parts to the Print Bed is strongly recommended.
** Using a Brim to hold parts to the Print Bed is strongly recommended.
Allen
283

edits

Retrieved from "https://knowledge.hacklab.to/wiki/Special:MobileDiff/1308"

Navigation menu