Type A: Difference between revisions
Jump to navigation
Jump to search
→Machine Log: firmware update to get new head running.
(→Features: updates for new head assembly) |
(→Machine Log: firmware update to get new head running.) |
||
| Line 55: | Line 55: | ||
!Entry By | !Entry By | ||
|- | |- | ||
|August 21, 2017 | |||
| | |||
* Updated firmware using "stock" firmware with just some configuration changes | |||
* w/ help from Igor, troubleshoot problems with new head. (BAD thermistor.) | |||
* Crimp Molex Connectors onto the 2nd head that we have. | |||
** Head Temp.'s seem to oscillate plus/minus 10°C !!! | |||
* Run PID auto-tuning, to determine values that will provide stable head temperatures. | |||
** Had to completely unplug this printer (including USB) for a couple of min. to get auto-tuning to stop continuously running. | |||
** Set the "good" values that were written down into Octoprint. (Will flash those values into firmware next.) | |||
|Allen | |||
|- | |||
|August 10, 2017 | |August 10, 2017 | ||
| | | | ||