3D Printers/FlashForge Creator Pro: Difference between revisions

Jump to navigation Jump to search
(→‎Slic3r Settings: add notes to install using Ubuntu 14.04 based Linux)
Line 56: Line 56:
These are general printer settings that work. If filament has different temperature settings, follow filament temperature settings.
These are general printer settings that work. If filament has different temperature settings, follow filament temperature settings.


Smaller prints will better adhere to the bed than larger prints. If the print hasn't failed in the first 10% of the print job, it will unlikely to fail after that.
Smaller prints will better adhere to the bed than larger prints. If the print hasn't failed in the first 10% of the print job, it will be unlikely to fail after that.


Use Cubic Infill (Available only in Slic3r prusa edition), as it provides rigidity in all directions [http://www.prusaprinters.org/introducing-slic3r-prusa-edition/] and doesn't make printer resonate.
Use Cubic Infill (Available only in Slic3r prusa edition), as it provides rigidity in all directions [http://www.prusaprinters.org/introducing-slic3r-prusa-edition/] and doesn't make printer resonate.

Navigation menu