Type A: Difference between revisions

Type A (view source)

211 bytes added , 13 November 2017

→‎Machine Log: update for what done last week

283

edits

@@ Line 161: / Line 161: @@
 |-
-|October 31, 2017
+|November 08, 2017
 |
-* Getting layer shift problems (on the Y axes) ever since the 50mm Radial to 40mm Axial adapter was installed.
+* Suddenly have constant layer shifts due to LOOSE BELTS. (Very loose, both X & Y.)
-** Had repeatedly tried to clean & Lube the printer rods. (Getting dark build-up on right side of top Y/head rod.)
+* Tighten all 3 Belts for X/Y movement.
-* Replace the 3D printed adapter with a simpler part -- which is both lighter, and does not stick out as far.
+* The 2 Y Belts '''will continue to loosen''' due to how the front plywood piece is warping.
-** https://www.thingiverse.com/thing:2055378
+|Allen
+|-
+|November 07, 2017
+|
+* Replace Nozzle with a REAL E3D Nozzle, and tighten to stop PETG leaking. (Took only 1 try to properly tighten using the REAL E3D Nozzle.)
+|Allen
+|-
+|November 02, 2017
+|
+* PETG is '''again''' leaking out between the Nozzle & the Heatblock.
+* Tried tightening this 3 times ... still leaking ... waiting for REAL E3D Nozzle to try again.
 |Allen
 |-